Product introduction of the Polypropylene tank
Shandong Jintiancheng Plastics Co., Ltd. specializes in the production of HDPE and PPH anti-corrosion equipment, including tanks, tanks, mixing tanks, various tower equipment, reactors, acid washers, electrolytes, separators, filters, pipes and pipes, etc.. We use the world's advanced screw winding whole one time superposition molding process equipment, which can be up to 100m3 tank volume. We introduced the PPH winding tank project in June last year. The solution to this weld problem is great. Once formed, there will be no these safety hazards. In other words, we will save 30 % -- 40 % of labor costs. Welcome to consult customer service or call our contact hotline.
Polypropylene tank is the use of the company's latest development of extrusion winding welds technology to ensure that the tank mechanical strength and safety and reliable performance. Using this proprietary technology, the thickness of the belt can reach more than 65mm, and the profile can be gradually changed, and the raw materials can be concentrated in the production of tanks at places where the force is high. The storage tank is thin and thick on the whole, so that the overall force of the barrel is uniform and the design is reasonable, which can ensure the mechanical strength and safety of the storage tank. It can safely contain a variety of corrosive liquids. In addition to its good sealing performance, this can also has lighter weight and exquisite appearance. It is more reliable than plastic roll molding, plastic sheet welding, FRP winding, hand paste, carbon steel lining and other processes. Advantages. The welding of the bottom of the tank and the bottom of the tank body is the place with the greatest force. The Company uses the imported automatic sliding extruder welding machine to achieve the welding of the large weld at once, without repeated welding, and to ensure that the tank and tank body are not leaked under any circumstances. It can safely contain all kinds of dangerous corrosive liquids and ensure work and environmental safety.
The characteristics of the bottom welding process of Polypropylene tank
Mechanization, the highest degree of automation, product quality stability; The welding seam specification can be designed according to the stress bearing characteristics of the product, so that it can give full play to the integrity of the weld. The product integrity is good, the weld is integrated with the mother, and the corrosion resistance and leakage resistance are good; Can reduce flying edge, seam level beautiful; Add ultraviolet absorbent to PPH granules to prevent aging and prolong the service life.
Product parameters of the Polypropylene tank
PP Tank Type : Round
Material : PPH Winding Tank (Grey )& HDPE Winding Tank ( Black)
Size: Volume 0.5m³ to 60m³
Use :Chemistry, Iron & Steel, Metallurgy, Pharmacy ,paper making , electric power, food and water treatment, etc.
Advantages of Product Production Process
The exclusive method of the winding process without welding developed is a guarantee of the excellent technical strength and reliability of our tanks.
Product production process of the Polypropylene tank
1. tank extrusion winding: tank welding is the use of PPH screw extrusion winding unit PPH particles processed into tank molding process. The system adopts the process of extruding PPH particles after hot melting and winding them into tanks on steel molds.
2.External welding: External welding is the process by which a large weld weld can be formed at one time by using an imported automatic extruding welding unit to achieve the maximum stress in the storage tank. The new PPH particle material of the same nature as the tank is melted into a large weld and integrated with the bottom of the tank and the tank.
3. internal welding production: Internal welding is the use of automatic long arm extrusion welding process, is the most important step in all processes. The new PPH particle material of the same nature as the tank is heated at the internal weld and is integrated with the bottom of the tank and the tank. The principle is the same as that of external welding, except that its equipment is different.
4,.pipe mouth installation and production: pipe mouth installation is the last process, which is equivalent to a reduced version of the bottom welding, that is, using an imported small automatic extrusion welding unit, which will take over and weld the flange. A hole opener is used to open the tank to the appropriate size, and finally the German MUNSCH hand-held extruder welding is used.
Last news:
Safety precautions for PP Storage tank
1. The operation of this equipment must be strictly and systematically trained, and the operator who has passed the examination(written and actual operation) and obtained the operating license of the equipment shall conduct the operation of the equipment. Any personnel who have not been trained shall strictly prohibit the operation of the equipment.
2. Not familiar with the performance of equipment strictly prohibit operating equipment, safety and protection supplies not wearing complete strictly prohibit equipment, not all familiar with the equipment operating rules strictly prohibit operating equipment.
3. The professional technicians and alert personnel on the scene have the right to prevent and correct other people's illegal operations, adventure and brutality and other unsafe behaviors; The right to refuse to comply with safety requirements or violate the rules and regulations of command, dispatch and scheduling.
4. All personnel entering the unloading area are prohibited from entering with communication tools! Must perform the body electrostatic discharge operation at the electrostatic discharge point!
5. Before starting work, it is necessary to check whether the insulation pads in front of each control cabinet are complete and dry. The device must be used to check whether the device has leakage before starting.
6. The equipment should press the red emergency switch in case of an emergency, turn off the total power supply of the equipment, immediately notify the equipment maintenance worker to handle it, and notify the relevant management personnel and equipment personnel to strictly prohibit unauthorized handling.
7. It is strictly forbidden under any circumstances for equipment safety protection devices to be removed, damaged, shorted or diverted for any reason to render the safety protection facilities ineffective.
8. It is forbidden to operate equipment when eating or drinking drugs or beverages that reduce attention or trance.
9. Interns are forbidden to operate equipment alone without the supervision of a monitor or master!
10. It is strictly forbidden to enter the equipment's internal intervention in all or part of the body during the operation of the equipment when the process is immature and unreasonable.
11. It is strictly forbidden to start work when the plant leaks or the water around the equipment.
12. All types of lubricants and liquid media must be cleaned in time if spilled. It is forbidden to operate in a wet and slippery environment.
13. It is strictly forbidden to place items in operating cabinets and operating platforms to prevent short-circuit injuries and damage to equipment.
14. When the operator is repairing or cleaning the equipment, he must turn off the power supply of the equipment and hang the safety warning sign of "no closing, someone working". He must have someone to monitor it. It is forbidden to operate alone! No use of chemical fiber material cleaning and cleaning equipment!
15. The purchasing manager of JIT Matching Office issued the notice of incoming and outgoing materials in written form one day in advance. The Human Resources Department arranged the alert of the unloading area. The production company was ready to unload the materials. The tanker must be equipped with a damper. It is forbidden to burst in the hot sun! Do not discharge material in thunder rain! Tanker trucks are strictly forbidden to stay at the company gate for more than 60 minutes!
16. To enter the cyclopentane area, wear antistatic clothing and protective clothing. It is forbidden to wear chemical fiber clothing. It is forbidden to change clothes in the cyclopentane area and to wear shoes with nails.
17. It is strictly forbidden to carry BP machines, mobile phones, flammable and explosive items into the unloading area, and it is forbidden to use ironware to beat in the cyclopentane area.
18. When a leak is detected, the surrounding source of fire shall be immediately removed, the vessel shall be collected as soon as possible, the vessel shall be cooled by water if fire occurs, and, if possible, the vessel shall be moved from the fire site to an empty place where the vessel has changed colour or produced sound from the safe discharge device. Fire extinguishing agents can use sand, dry powder or carbon dioxide, and water extinguishing is ineffective.
19. If cyclopentane contaminates clothing, thoroughly wash skin with soapy water and water.
20. If cyclopentane splashes into the eye, the eyelids should be raised and washed with flowing water or saline water.
21. If cyclopentane is inhaled, it should be immediately removed from the scene to the fresh air, and the respiratory tract should be kept open. If breathing is difficult, oxygen should be transported immediately. If breathing stops, artificial respiration should be performed immediately for medical treatment.
22. If cyclopentane is swallowed, drink enough warm water to induce vomiting and seek medical treatment.
23. Special personnel must be on duty during holidays and specific periods to prevent accidents.
Hot Tags: polypropylene tank, China, factory, suppliers, manufacturers, high quality, price, sell