Vacuum Liquid Oxygen Storage PP Tank has the advantages of corrosion resistance, acid and alkali resistance, long service life, light weight, high strength, safe transportation, and convenient maintenance. The working pressure of PP storage tank is normal pressure, the working temperature is PP-10℃～120℃, PVC-40℃～60℃. The PP storage tank has the advantages of integral one-time molding without welding seam, impact resistance, anti-aging, light weight, no leakage, acid and alkali resistance, long life, and conforms to hygiene standards.
Vacuum Liquid Oxygen Storage PP Tank is mainly used in chemical industry, metallurgy, electroplating, chemical fiber, printing and dyeing, environmental protection, petroleum, electronics, medicine, food, grease, light industry, acid making, pickling, battery materials and other industries. The foundation for installing the plastic storage tank is required to be level and able to withstand the corresponding pressure. If the steel structure is used, the gap should not be too large, and a wooden or iron plate should be laid on it. When storing chemicals in plastic storage tanks, there should be good drainage trenches and dilution devices around the site. Since the bottom of the storage tank inevitably protrudes into the tank to form a spherical crown when it is formed, the foundation should be made into a spherical crown with a similar shape to the bottom. When used in the open air, it is appropriate to avoid direct sunlight to prolong the service life. After the storage tank is installed, the sealing performance of the interface should be checked before use, and liquid can be added over the interface to observe whether there is leakage.
Vacuum Liquid Oxygen Storage PP Tank is equipped with an integral one-time forming reinforcing ring. If necessary, a metal reinforcing sleeve can be used to limit the expansion and deformation of the tank body, so as to avoid the expansion of the bottom. When installing heavy accessories such as mixers on the barrel, or when people have to work on the top of the tank and the top of the tank cannot bear the weight of the person, please make another shelf or ladder, and pay attention to the safety of the operation. When the liquid level cannot be controlled, an overflow port should be installed to prevent the liquid from overflowing from the manhole and causing unnecessary injury. When the liquid inlet and discharge flow is large, the exhaust pipe with the corresponding flow should be installed.