PVC waterproof coil sheet of the main purposes
It can be used in all kinds of roof waterproofing, basement, reservoir, dam, highway tunnel, railway tunnel, air defense hole, grain depot, garbage factory, waste water treatment and other building waterproofing works in various industrial and construction industries. Plastic flooring is made of polyvinyl chloride (PVC) coil floor and PVC bulk floor. Polyvinyl chloride (PVC) Coil flooring is made of polyvinyl chloride resin as the main raw material, adding the appropriate additives, in the sheet-like continuous substrate, the coating process produced by the base material with the foam Vinyl coil flooring and dense polyvinyl chloride sheet flooring with substrate.
Polyvinyl chloride (PVC) Coil flooring is suitable for laying the living room, bedroom floor (mid-range decoration), selection should choose excellent products or first-class goods.
The floor area required for the floor can be calculated by multiplying the laying area by 1.10. If the width of the web is exactly the width of the room, you can consider a 2% loss. Coil flooring can be retail, how much to buy the number of inscriptions should be careful planning, to avoid waste.
Polyvinyl chloride (PVC) Bulk flooring is made of polyvinyl chloride (PVC) and its copolymer resin as the main raw material, adding filler, plasticizer, stabilizer, coloring agent and other auxiliary materials, by rolling, extrusion or extrusion process Made, there are two kinds of single and homogeneous composite. Its specifications are 300mm × 300mm, thickness 1.5mm.
Each floor area of 0.09, block floor loss rate of 2%.
Coil floor is the wear-resistant layer rolled out on the die for packaging, the application of corrugated box packaging. In each volume of packaging or each box should be marked on the name, production plant name, production date, batch number, grade, color, quantity, weight and so on. In the transport process shall not be affected, sun, rain. Indoor storage of air to flow, dry, from the heat source shall not be less than 1m. The floor of the web should be stacked upright.
Precautions
1, paving PVC waterproofing membrane, should pay attention to the construction environment temperature, coil temperature -5 ℃ above. The use of full-thickness construction, the use of coil temperature can only be above 5 ℃.
2, paving PVC waterproofing membrane, the special parts should be additional layer.
3, pay attention to construction protection, the end of the day before the construction should be temporary fixed coil, so as not to be blowing the wind.
4, the construction of the waterproof layer should be carried out after the end of the process, not cross construction. If you need to install a waterproof roof in the installation of equipment, should be in the equipment base parts for additional layer treatment, in order to high on the waterproof layer cover, subject to acceptance of the waterproof layer after passing.