What are the specific construction steps of White Solid PVC Sheet? I believe that many of you are also interested in this question, so let's tell you the answer to this question:
1. Grid elastic line: carefully elastic line according to the room size and plastic board specifications.
(1) The size and shape of the base grid should be determined according to the design pattern, the size of the room and the specific size of the plastic board.
(2) Consider reducing the number of welds as much as possible when dividing the grid, taking into account the symmetry of the grid. If the wall around the room is not full enough, it can be treated as a trim.
2. Before the White Solid PVC Sheet is pasted, it should be stretched on the ground according to the design grid size, and the grid size should generally not exceed 90 cm. When playing the line around the room or at the root of the column, leave a width of not less than 12 cm. Trim when gluing plastic skirting boards.
3. Pre-laying of cutting material: In order to facilitate the adjustment of White Solid PVC Sheet, pre-laying must be carried out after cutting.
The cutting should be carried out according to the actual size of the floor of the room. When cutting, lay the soft PVC floor flat on the ground or the operating platform, draw a cutting line on the board, and cut it with a "V"-shaped slit knife. The edge of the board should be cut into a smooth groove, and the angle of the groove and the groove of the two boards should be about 55 degrees.
4. White Solid PVC Sheet seam welding: seam seam is an important means to ensure the flatness and integrity of the ground, so the welding must be full and obedient.